FactionFab Brake Upgrade Kit (Rear) – FRS/BRZ/86

Code: 1.10146.1

$325.00

In Stock

Description

FactionFab Brake Upgrade Kit. This kit includes new rotors, brake pads, and stainless steel brake lines to improve the braking performance of your vehicle. 

 

REAR LOCATION

FITMENT NOTE: This is for models WITHOUT the brembo package, and WITH the vented rear rotor.

FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR REAR

  • Rear location
  • Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
  • High-carbon content for wear resistance, thermal stability, and cracking resistance
  • Bi-directional design, meaning rotors are not side specific
  • Symmetric vane castings to increase heat dissipation efficiency and thermal stability
  • Double-disc ground, non-directional finish
  • Mill balanced for reduced vibration
  • Precision machined with run-out spec of no more than .002″, Disc Thickness Variation (DTV) of .0005″
  • Fully machined non-friction surfaces for perfect fitment
  • Sold as a pair
  • Electronically applied E-coating for corrosion resistance
  • 400-hour salt spray tested
  • Fully coated inside and out
  •  

    FACTIONFAB F-SPEC REAR BRAKE PADS

  • Rear location
  • Para-Aramid Composition
  • Ideal for auto-x, light track days, or aggressive street driving
  • 1300ºF maximum operating temperature to aid in fade resistance
  • Excellent modulation and initial bite
  • Pre-scorched compound to aid in cold weather modulation
  • O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
  • Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
  • Positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
  • Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
  • Mechanically attached application specific pad shims are designed to eliminate noise associated with brake pad vibrations
  •  

    FACTIONFAB STAINLESS STEEL BRAKE LINES

  • Rear location
  • PTFE Teflon inner liner to carry the fluid
  • Stainless steel woven middle layer for support of the inner liner
  • Abrasion-resistant, impact-resistant
  • Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
  • Each line is 4500psi burst pressure tested
  • Stainless steel precision machined fittings for perfect fit and corrosion resistance
  • Increased pedal feedback as a result of elimination of soft rubber lines which are prone to swelling and deforming
  • 100% model specific for perfect fitment
  • Includes hardware
  • Additional information

    Weight 22.68 lbs
    Description_tag

    Title_tag

    ,

    Brand

    FactionFab

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.